If the parking brake light doesn't turn off, several troubleshooting steps can be taken to identify the issue. These include-1. Checking The Parking Brake Switch . The parking brake switch is under the parking brake lever or pedal. Ensure the parking brake lever or pedal is fully released to check the button.
Received 54 Likes on 43 Posts. 2012 Parking Brake Problem-Not Just Me. I took my less than one month old truck into service because when I release the parking brake, the light and the warning stays on. I have to set and release it a few times, maybe jiggle the handle, for it to go off. Check to ensure you have enough fluid in the brake master cylinder. A lot of vehicles have the sensor which detects the level of the fluid in on the same circuit as the parking brake. If you find this low, you may want to check the condition of your brake pads.
1 Check that the parking brake is disengaged. It might seem obvious, but the first thing to do is make sure that the parking brake is switched off. Whether you have a parking brake with a hand lever, floor pedal, or electronic switch, make sure it's in the off position.

1 What Are the Reasons Your Brake Light Won't Turn Off? 1.1 - Unresponsive Brake Light Switch; 1.2 - Damaged Headlight Switch; 1.3 - Grounded Turn Signal Wiring; 1.4 - Damaged Headlight Relay; 1.5 - Damaged Light Sensor; 1.6 - Damaged Daytime Running Light Module; 2 What Are the Steps To Make Your Brake Lights Turn Off? 2.1

14. Feb 10, 2021 #1. I have just purchased a motorhome which is on a 2007 65c18 cab chassis. It has developed a fault whereas the park brake light and alarm comes on intermittently while driving. The fault also occurred while at home so I definitely know when the fault is present there is no voltage on the switch attached to the handbrake even OcUdWA. 0 69 311 160 391 24 259 115 484

parking brake alarm won t turn off